Operating Manual

6
2 Safety Information
2.1 Storage of this Manual
Keep this user manual safe and in the vicinity of the product. All persons required work on or
with the product should be advised on where the manual is stored.
2.1 Special Conditions for Safe Use – ATEX IECEx
• Tag must only be charged in safe area only
• Tag must only be charged from a supply meeting the following requirements:
o A SELV or PELV system, or
o Via a safety isolating transformer complying with the requirements of
IEC 61558-2-6, or technically equivalent standard, or
o Directly connected to apparatus complying with the IEC 60950 series,
IEC 61010-1, or a technically equivalent standard, or
o Fed directly from cells or batteries.
• Tag charger input U
m
= 6.5Vdc.
• Battery cells must not be replaced in a hazardous area.
2.2 Warnings
Warning! The iTAG X30 should only be cleaned with a damp cloth.
Warning! Do not open the iTAG X30. There are no user-serviceable parts inside.
Warning! Any repairs or replacement of parts MUST be performed by the
manufacturer or its nominated sub-contractor or agent.
Warning! This product can be delivered in a number of different variants; each
variant has restrictions on where it can be used. Please read the
information in the type codes section fully and ensure that your iTAGX30
is suitable for the hazardous area in which it is to be used.
Warning! Before setting the units to work, read the technical documentation
carefully.
Warning! The iTAG X30 contains a lithium ion battery. Do not force open, heat
excessively or dispose of in fire.