Operating Manual

3 Tag Features

Emergency Call Button

The iTAG X30 features a call button which can be activated in the case of an

emergency, which triggers an event in MobileView to show the location of the

worker in need of assistance.

Visual, Audible and tactile indication

The iTAG X30 features multiple LED's to indicate to the worker the tag is

running, the call button has been activated and when the tag has a low battery.

Tactile and audible indications occur to inform the wearer that the call button

has been activated.

Wi-Fi Security

The iTAG X30 supports 802.1x Enterprise security networks with PEAP-

MSCHAPv2 protocol.

Beaconing

The tag utilises lightweight beaconing communication.

Wi-Fi/GPS

The iTAG X30 features hybrid technology which includes Wi-Fi and GPS to

accurately locate workers in all areas of the site, whether there is a dense Wi-Fi

infrastructure or not.

LF Radio

The iTAG X30 sends out specific location reports upon arrival at a chokepoint

or gateway where an LF exciter is positioned. The tags behaviour can be

automatically modified whilst in certain areas after passing through a

chokepoint such as a doorway or gate.

OTA (Over the Air) Updates

The tag has firmware over-the-air update capability which can be used when

new functionality becomes available. This eliminates the need to return the tag

to the factory to enable new features.

Battery and Battery Life