Technical data

Operating Manual
12
5.4 Safety Precautions
Important For the installation, maintenance and cleaning of the units, it is
absolutely necessary to observe the applicable regulations and
provisions concerned with explosion protection (EN 50014, EN 60079-
14:2003) as well as the Accident Prevention Regulations.
5.5 Cleaning and Maintenance Intervals
The cleaning intervals depend on the environment where the system is installed.
5.6 Aggressive substances and environments
The iCAM100 is not designed to come into contact with aggressive substances or
environments, please be aware that additional protection may be required.
5.7 Exposure to external stresses
The iCAM100 is not designed to be subjected to excessive stresses e.g. vibration, heat,
impact. Additional protection is required to protect against these external stresses.
The iCAM100 will require additional protection if it is installed in a location where it may be
subjected to damage.