User guide

ManualsBrandsextronics ManualsCamcorderiCAM501U

ATEX/IECEx & Class1 Division1

Safety Instructions

iCAM501U

Country of Origin: United Kingdom

Document Number 405430 Revision 1.0 - Dated 28

May 2014 Part number A25-0125

notice, the latest version applies.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following

two conditions: (1) This device may not

cause harmful interference, and (2) this

device must accept any interference

received, including interference that may

cause undesired operation

(Date markings July 18

2013

onward)

Summary of content (15 pages)

PAGE 1
ATEX/IECEx & Class1 Division1 Safety Instructions iCAM501U th (Date markings July 18 2013 onward) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Country of Origin: United Kingdom th Document Number 405430 Revision 1.
PAGE 2
Operating Manual Contents 1 2 3 4 5 6 7 Safety Instructions ............................................................................................... 3 1.1 Storage of this Manual ................................................................................. 3 1.2 Special Conditions for Safe Use ................................................................... 3 1.2.1 ATEX / IECEx........................................................................................ 3 1.3 List of Notes ......
PAGE 3
Operating Manual 1 Safety Instructions 1.1 Storage of this Manual Keep this user manual safe and in the vicinity of the device. All persons required to work with the device should be advised on where this manual is stored. 1.2 Special Conditions for Safe Use 1.2.1 ATEX / IECEx (Taken from ITS09ATEX2868X Issue 4 (Amended March 2013) Section 17 and IECExITS09.
PAGE 4
Operating Manual Warning! This manual applies ONLY to iCAM501U units marked with a date code AFTER 18th July 2013. Warning! For ATEX/IECEx GROUP II applications, ONLY Duracell Plus MN1500, Duracell Procell MN1500, Duracell Procell PC1500, Energizer E91 or Panasonic LR6XWA cells may be used with the iCAM501U (see Table 1). Warning! For ATEX/IECEx GROUP I applications, ONLY Duracell Plus MN1500 or Duracell Procell MN1500 cells may be used with the iCAM501U (see Table 1).
PAGE 5
Operating Manual Warning! For Class 1 Division 1 applications the rated ambient temperature range of the equipment is from -20oC to 55oC/50oC dependent on the cells used (see Table 1). Warning! Any connection to the iCAM501U USB port must NOT be made in a hazardous area.
PAGE 6
Operating Manual 2 User guide 2.1 Changing/installing the cells To change or install the cells in the iCAM501U turn the screw as indicated below to remove the cover. Use a coin to turn the screw anti-clockwise, the lid should then pop up. To close it again, turn the To close it again, the coin clockwise, theturn screw coin clockwise, the screw should click into place once should clickseated. into place correctly once correctly seated.
PAGE 7
Operating Manual 3 Structure and Function 3.1 Intended Purpose Usage Important Before setting the unit to work, read the technical documentation carefully. Important The latest version of the technical documentation or the corresponding technical supplements is valid in each case. The iCAM501U is built using modern components and is extremely reliable in operation; however it must only be used for its intended purpose.
PAGE 8
Operating Manual 3.7 Aggressive substances and environments The iCAM501U is not designed to come into contact with aggressive substances or environments, please be aware that additional protection may be required. 3.8 Exposure to external stresses The iCAM501U is not designed to be subjected to excessive stresses e.g. vibration, heat, impact. Additional protection is required to protect against these external stresses.
PAGE 9
Operating Manual 4 Technical Data Certification Number ITS09ATEX26868X, IECEx ITS 09.
PAGE 10
Operating Manual 5 EC Declaration of Conformity 10
PAGE 11
Operating Manual 11
PAGE 12
Operating Manual 6 FM Class 1 Division 1 USA Certificate of Compliance 12
PAGE 13
Operating Manual 13
PAGE 14
Operating Manual 7 FM Class 1 Division 1 Canadian Certificate of Compliance 14
PAGE 15
Operating Manual 15