User guide

Operating Manual
3.5 Safety Precautions
Important For the installation, maintenance and cleaning of the units, it is
absolutely necessary to observe the applicable regulations and
provisions concerned with explosion protection (EN 60079-0, EN 60079-
14) as well as the Accident Prevention Regulations.
3.6 Cleaning and Maintenance Intervals
The cleaning intervals depend on the environment where the system is installed.
3.7 Aggressive substances and environments
The iCAM501U is not designed to come into contact with aggressive substances or
environments, please be aware that additional protection may be required.
3.8 Exposure to external stresses
The iCAM501U is not designed to be subjected to excessive stresses e.g. vibration,
heat, impact. Additional protection is required to protect against these external
stresses.
The iCAM501U will require additional protection if it is used in a location where it may
be subjected to damage.
The iCAM501U may be fitted with the optional antistatic rubber boot accessory
supplied by Extronics. However, this does not guarantee any additional impact
resistance, and due care must still be taken to avoid damage to the unit, and to
inspect it before taking into a hazardous area.
14