User guide

Operating Manual

camera is first used.. The time and date must be set using a PC via the USB

interface. To set the time and date of the camera refer to the main manual.

2.5 Taking a picture

There are a few different options available when taking a picture:

• A picture can be taken with no flash and no audio recording

• A picture can be taken with a flash to allow a good picture to be taken in low

light conditions.

• A picture can be taken and an audio recording taken after the picture has

been taken to provide an audio record for the picture.

• Or a picture can be taken with a flash and also create an audio recording.

Once a picture has been taken the LEDs and the buzzer are used to indicate if a

good picture has been taken or not. For more details, the latest full iCAM501U

manual can be found on the Extronics website at www.extronics.com

2.5.1 Taking a picture

Green LED will flash

rapidly when picture is

being taken. Ensure

you keep your hand

still. See page 10/11

for details of LED

status codes

Press and hold trigger button

until green LED starts

flashing rapidly, wait for

green LED to stop flashing

before moving