Quick Start Guide

This Exxentric Flywheel Device is equipped with a built-
in kMeter that connects with your Android or iOS device
to provide real time feedback. Two AA batteries are pre-
installed and the kMeter is ready to connect via the app
directly.
The kMeter turns on and off automatically and has no
manual switch.
To distinguish between your different device and kMeter
units, a sticker with a unique ID number on it is included.
Place this sticker on your device for future reference.
This unique number corresponds to the kMeter unit
installed on the device.
If multiple kMeters are in range, a drop down list with
kMeter IDs will be visible when the ‘connect’ option in the
app is chosen. From here, select the device you wish to
be connected to.
This is your kMeter ID sticker below
To learn more about the kMeter, how it works and
about the different metrics, head over to our website:
exxentric.com/kMeter
For questions or concerns, please contact:
[e-mail]
The device has been evaluated to meet general
RF exposure requirement.This device should
be installed and operated with a minimum
distance of 5mm between the device and your
body.