Installation Guide

12
2. Dual Support & Cross Beams Assembly
Step 1. Evenly space the Notched
Beam ( C ) with the Wing
Bracket (Item 1). With a
metal drill bit, drill a pilot
holes. Duplicate this step for
the second Notched Beam.
Note: Make sure the
notches on the beams line
up perfectly so Cross Beam
(B) fits.
Step 2. Apply Exterior Construction
Adhesive (Item 7) to the
Wing Bracket (Item 1) facing
the Notched Beam ( C ).
Clamp Wing Bracket and
Notched Beam together and
secure with four #14 x 3/4”
Hex Head Self Drilling Screw
(Item 4).
Step 3. Secure Load Plate to post
using one #12 x 1 1/2” Philips
Pan Head Screw (Item 3).
Version 3.0, March 2010
Item 4
Item 1
Item 3
Item 6
Item 5
Item 2
C