Installation Guide

ELCARIM 10-09

Installation Instructions

Cast Stone Arbor

Materials Required:

1. Two 4” x 4” wood support posts 10’ long (minimum)

2. Exterior construction grade clear silicone sealant

3. 80 lb. ready mix cement (est. 2 bags per post)

4. (24) #10 x 2” Long common nails

5. Two 12” diameter Sonatubes for concrete - Optional

6. Two 2” x 4” x 8’ wood - Optional

7. Wood shims - Optional small pack

Tools Required:

 Shovel

 Post Hole Digger

 Tape Measure

 Level

 Step Ladder

 Drill

 Screw Driver Set

 Caulk Gun

 Wheelbarrow

 Trowel / Float

 Bucket / Hose

 Circular / Hand Saw

 Carpenter Square

 3/8” Nut Driver

Arbor Kit Description:

Purlins

Support Beam

(Single or Double)

Cast Stone

Extension Column

Cast Stone Cap

Cast Stone Base

 Clamps

 Hammer

 String Line

 Carpenter Pencil

 Drill bits