Installation Guide

ELCARIM 10-09
7
Installation Instructions
Cast Stone Arbor
Figure 7
Questions? Contact your local Eye Level Dealer or Eye Level Customer Service at
888.782.1760, option 3.
7. Align the mounting holes of the post plate and the wing bracket. Center the two brackets
over the extension column and secure in place with (2) #12 x 1 1/2” Phillips pan head (Item
#3), screwing directly into the top of the wooden post (Figure 5). Apply a bead of silicone
around the edge of the plate to provide a seal.
8. Assemble the double beams to the wing brackets using
construction adhesive (Item #5) and clamps. Mark the hole
locations and pre-drill the holes for (Item #6). Secure in place with
(4) #14 1/4” self-drilling screws (Item #6) (Figure 6).
Final Step: Evenly space (5) purlins across the beams and secure with the construction adhesive
(Item #5) (Figure 7).
Figure 5
Note: Figures 5 is shown with the post
extended above the Column Extension
for clarity only.
Figure 6