User`s manual

15
3.4 Using a Remote Control
y Usage method of a remote control is same as that of the front panel keys.
y Follow the procedure below when you use the remote control for multi DVRs.
① Check System ID (e.g., between 1 and 999) of the DVR you wish to use
(SETUP>SYSTEM>Information>Status>System ID).
② Hold up the remote control to face towards the DVR, and press the System ID numbers one by one, while pressing ID
button on the remote control. Note that the System ID is a 3-digit number. Button ‘10’ functions the same as ‘0’.
(e.g.: If System ID is 3, you should press 10>10>3 buttons in sequence while pressing the ID button)
3.5 Using a Mouse
y Mouse provides an easier access to adjustment. Refer to below for proper use of a mouse.
y Left mouse button functions the same as Enter ( ) key on the front panel of DVR.
y Right mouse button displays the following “Function keys” on your screen.
y Click Search menu at “Function Keys” the same as Search key on the front panel of DVR. Press the button, then the
Search menu will appear on your screen.
Name of
Key
Function
Name of
Key
Function
Display
Same as panel key
Event
Same as panel key (indicate System Log)
Sequence
Same as panel key
Search
One-touch playback (same function with
(PLAY/PAUSE)
Spot
Same as panel key
Setup
Same as panel key
Zoom
Same as panel key
Emergency
Same as panel key
Freeze
Same as panel key
Shutdown
Prestep before Power off
(SETUP>SYSTEM>Shutdown)
PIP
Same as panel key
Cancel
Cancel Function key menu
PTZ
Same as panel key
3.6 Screen Icons
Icon Description Icon Description
Continuous recording mode
In Audio recording
Event recording mode
(Alarm In/Motion)
4
CMS access indication/ No. of accesses
(up to 4)
In recording In channel sequencing
PTZ registration / PTZ mode Lock
Remote Controller
Setup in HDD Overwrite mode
Setup in HDD No Overwrite mode
(HDD Full)
Setup in HDD No Overwrite mode
(recording)