User`s manual

27
y Transparency range is between 0 and 100, with a larger number representing can see through it. (default 0)
y While pressing (+) or (-) button, a target value increases or decreases by 10 units.
4.3.2 Main Monitor
y Please click ( ) DISPLAY>Main Monitor, and the following screen will appear.
y The Main Monitor menu will allow you to adjust channel sequencing interval of Main monitor.
y Adjust interval for ‘Full screen sequencing’.
y Check 5 check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
y Use only with 8 / 16 channel DVRs.
y Adjust interval for ‘X4 Split Screen sequencing’.
y Check 5 check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
y ‘4 Split Screen sequencing’ is disabled in the following modes.
– 8 channel DVR: 3x3 Mode
– 16 channel DVR: 4x4 Mode
y Use only with 16 channel DVR.
y Adjust interval for ‘X9 Split Screen sequencing’.
y Check 5 check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
y ‘9 Split Screen sequencing’ is disabled in 4X4 Mode.
4.3.3 Spot Monitor
y Please click ( ) DISPLAY>Spot Monitor, and the following screen will appear.
Full Seq
Quad Seq
X9 Seq