User`s manual

28
y This menu will allow adjust interval of channel sequencing of Spot monitor.
y Click ( ) Spot Select to choose Spot monitor to be set up.
y Check (check box next to the camera you want to include in sequencing. Any camera with unchecked check box will be
excluded from channel sequencing.
y Adjust the rotation interval of camera by clicking Dwell column. The rotation interval changes to 3>5>10>15>30>60
seconds by each press.
4.3.4 Spot Monitor control on display mode
A Type model
y Every click of the “SPOT” menu item on mouse right click menu will indicate “SP” and “SP1”, on the right bottom of main
monitor.
y After “SP1”, the it shows nothing. And system gets out of spot monitor control mode.
- SP mode : Sequence is automatically activated as configured on Spot monitor Setup menu.
- SP1 mode : Displayed channel on Spot monitor 1 can be changed by pressing channel button.
Sequence stops at “SP1” mode.
B Type model
y Every click of the “SPOT” menu item on mouse right click menu will indicate “SP”, “SP1”, “SP2”, and “SP3” on the right
bottom of main monitor. After “SP3”, the it shows nothing. And system gets out of spot monitor control mode.
- SP mode : Sequence is activated as configured on spot monitor Setup menu.
- SP1 mode : Displayed channel on Spot monitor 1 can be changed by pressing channel button.
Sequence stops at “SP1” mode.
- SP2 mode : Displayed channel on Spot monitor 2 can be changed by pressing channel button.
Sequence stops at “SP2” mode.
- SP3 mode : Displayed channel on Spot monitor 2 can be changed by pressing channel button.
Sequence stops at “SP3” mode.
4.4 DEVICES
y Please click ( ) DEVICES, and the following screen will appear.
4.4.1 Network
y Please click ( ) DEVICES>Network, and the following screen will show.