User`s manual

y Choose ‘OK’ to confirm the setting.

y Please click ( ) Notification, and the following screen will appear.

y The Notification menu will allow you to set transmission of Event occurred in DVR via E-Mail.

y Click ( ) the keyboard icon on the right-hand side of Add E-Mail frame, and the virtual keyboard will appear. Please register

E-Mail address. E-Mail address should contain @.

y Click ( ) the keyboard icon on the right-hand side of SMTP Server frame, and the virtual keyboard will appear. Please

y Click ( ) the keyboard icon on the right-hand side of Sender ID frame, and the virtual keyboard will appear. Please register

an ID having registered to the sender mail server (e.g., tony123).

y Click ( ) the keyboard icon on the right-hand side of Sender Password frame, and the virtual keyboard will appear. Please

y When an event occurs, you can send an email to a designated mail address by clicking Attach button and selecting Data to

be transmitted. You may select one of JPEG, VIDEO CLIP, None modes. In case of transmitting VIDEO CLIP Data, set the

duration of time for recoded images in Duration item (e.g., 1 sec, 3 sec, 5 sec).

4.4.2 Camera/PTZ

y Please click ( ) DEVICES>Camera/PTZ, and the following screen will appear.

y Give titles to cameras and choose PTZ protocols.

y Click ( ) the keyboard icon on the right-hand side of each frame on Title column, and the virtual keyboard will appear. Then,

y If you check 5 a check box on No column, a video of the corresponding camera is recorded and displayed on the monitor.

However, if you do not check the checkbox, both recording and monitor display stop. Then, DVR picture, instead of a

recorded video, will be displayed on the monitor.

CAUTION

Enable Dual Streaming will lower recording resolution in half : 352x240(352x288 in PAL) in 16 CH DVR

CAUTION

IF Port Number IS CHANGED, YOU MUST ALSO CHANGE Port Number OF CMS (Central Monitoring Station) PROGRAM.

Notification