User`s manual

32
y If you check 5 a check box on Convert column, a video is recorded but is not displayed on the monitor.
y Click ( ) each frame on PTZ column to select PTZ protocols connected to a corresponding camera.
y Click ( ) each frame on Set to set PTZ Settings connected to a corresponding camera.
y If you click (Default), proper number of selected PTZ will appear automatically. Please choose ‘OK’ to confirm the setting.
y Menu, Tour, and Pattern help you to use OSD function of PTZ camera.
PTZ camera itself supports OSD menu, use the setup value to more easily enter and use the OSD menu even in DVR.
If OSD enter command is 95 + PSET for example, designate 95 for Menu item,
if shortcut key to use Tour function is 71 ~79 + PSET, designate 70 for Tour item, and
if shortcut key to use Pattern function is 81 ~ 89 + PSET, designate 80 for Pattern item.
The setting information herein is used for PAN/TILT control in 5.1.5 (to be described).
If you click Default, basic setup values are given (i.e., Menu: 95, Tour: 70, Pattern: 80).
For further details on setting, please refer to the PTZ camera manual.
y Click ( ) ▲, ▼ direction buttons on the right-hand side of the ID column to set ID number (i.e., 0 ~ 9999) of each PTZ.
y While pressing (+) or (-) button, ID increases or decreases by 10 units.
y Choose ‘OK’ to confirm the setting.
4.4.3 Audio
y Please click ( ) DEVICES>Audio, and the following screen will appear.
y The Audio menu will allow you to choose whether to record Audio.
y When you check 5 a check box on No column, corresponding audio and video are recorded. However, if you do not check
the check box, recording stops.
y Choose ‘OK’ to confirm the setting.
4.4.4 Alarm In
y Please click ( ) DEVICES>Alarm In, and the following screen will appear.
CAUTION
WHEN YOU EXCLUDE A CORRESPONDING CAMERA VIDEO FROM RECORDING AND MONITOR DISPLAY (CHECK A CHECK
BOX ), MAKE SURE CHANNELS OF LARGE NUMBERS ARE EXCLUDED FIRST.