User`s manual

34
4.5.1 Settings
y Please click ( ) RECORD>Settings, and the following screen will appear.
y There are three kinds of recording mode.
– Continuous: record continuously.
– Event: record only when Sensor or Motion calls.
– Emergency: record when you press EMERGENCY key.
y The Continuous menu will allow you to set recording mode.
y Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. You cannot change camera titles
here.
y Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. You may select one of
704x480, 704x240, and 352x240.
y Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
NTSC(PAL) 352x240 704x240 704x480
4 Channel DVR
120(100) 120(100) 60(50)
8 Channel DVR
240(200) 120(100) 60(50)
16 Channel DVR
480(400) 240(200) 120(100)
y Click ( ) each frame on Quality column to select recording quality of a corresponding camera. You may select one of
Super, High, and Std.
y Choose ‘OK’ to confirm the setting.
y Please click ( ) Event, and the following screen will appear.
Event
Continuous