User`s manual

37
y Each frame on Title column shows camera title registered in DEVICES>Camera/PTZ. You cannot change camera titles
here.
y Click ( ) each frame on Resolution column to select recording resolution of a corresponding camera. You may select one of
704x480, 704x240, and 352x240.
y Click ( ) each frame on Frames column to select recording rate of a corresponding camera. Recording rate varies by
camera. Below lists the maximum recording rate of each camera.
NTSC(PAL) 352x240 704x240 704x480
4 Channel DVR
120(100) 120(100) 60(50)
8 Channel DVR
240(200) 120(100) 60(50)
16 Channel DVR
480(400) 240(200) 120(100)
y Click ( ) each frame on Quality column to select recording quality of a corresponding camera. You may select one of
Super, High, and Std.
y Click ( ) each frame on Duration column to select recording duration (i.e., 1 second ~ 3 hours) of a corresponding camera.
y Choose ‘OK’ to confirm the setting.
4.5.4 Motion Detection
y Please click ( ) RECORD>Motion Detection, and the following screen will appear.
y The Motion Detection menu will allow you to set Motion detection alarm.
y Press SETUP key (or right mouse button), and the SETUP menu will appear.
y Each of the items in SETUP menu describes its function.
– Camera: select camera for setup.
– Sensitivity: select sensitivity (Low, Normal, and High)
– Reverse Vert: activate the entire column at the cursor’s position.
– Reverse Horz: activate the entire row at the cursor’s position.
– Select All: active all blocks.
– Deselect All: deactivate all blocks.
– Copy to All Cameras: The present channel setup applies to all other cameras. Only when you click save button, the
changed setup can be saved.
– Save: save the new settings and go back to previous menu (page).