User`s manual

38
–
Exit: ignore the new settings and go back to previous menu (page).
– Cancel: cancel Motion Setup menu.
y Choose ‘OK’ to confirm the setting.
4.5.5 Holiday
y Please click ( ) RECORD>Holiday, and the following screen will appear.
y The Holiday menu will allow you to register holidays. Please follow the registration procedure below.
① Use arrow buttons in the Month Calendar to select Year and Month of holiday to be registered.
– : search subsequent ‘Year’
– : search previous ‘Year’
– : search subsequent ‘Month’
– : search previous ‘Month’
② Click ( ) on date you need to register as holiday.
③ Click ( ) ADD button, and the date you just clicked on will be copied to the Schedule frame for registration.
④ If you want to cancel the registration of a certain holiday, please click 6 button next to the Schedule frame.
y Since holidays may vary every year, we recommend you to update on a regular basis.
y Choose ‘OK’ to confirm the setting.
4.6 LINK
y Please click ( ) LINK, and the following screen will appear.
y The LINK menu will allow you to set recording modes of all kinds of alarms (Sensor, Motion Event, Video loss, System
Event, etc.), alarm output, e-mail notification and the like.
4.6.1 Alarm In
y Please click ( ) LINK>Alarm In, and the following screen will appear.
y Select cameras for recording while the motion sensor is in operation, and alarm outputs, and set up E-mail addresses for
notification.
y Link Notification displays E-mail addresses registered in DEVICES>Network>Notification.
y Please follow the setup procedures below.
① Click ( ) Alarm In frame, and select Alarm In 1.
② Select cameras for recording when Alarm In 1 is on. Please check 5 a check box under Link Camera. More than two