User`s manual

56
- Manager/User: allow user to authority.
y Save Option: allow user to select Drive(C, D) and folder to save data.
y Choose ‘OK’ to confirm the setting.
8.2.2 Remote Site
y This menu is for Network setup.
y Make CMS IP address and Port coincide with DVR.
y Remote Site Connection Setup:
- Site Name: input DVR site name to be displayed on the right-hand side of DVR icon. Please note that this name has
nothing to do with the ID registered in DVR. User may create the name that is fairly easy to distinguish.
- IP Address/Domain Name: input IP address or Domain Name of DVR (check with SETUP>DEVICES>Network in your
DVR).
- Command Port: input Administrator’s number among port numbers set in DVR (check with SETUP>DEVICES>Network
in your DVR).
- Stream Port: INPUT Video/Audio number among port numbers set in DVR (check with SETUP>DEVICES>Network in
your DVR).
y Remote Site Login Setup: input ID and Password.
- Please do not input ID and Password if you want a popup window for logon ID and password to appear at the time of
connection to CMS.
- Please input ID and Password if you want to connect directly to CMS without ID and password verification.
- ID and Password should be coincident with those of DVR. If Password for DVR has not been set up, enter ID only (check
with DVR: SETUP>SYSTEM>Account>User in your DVR).
- Transfer Camera Select enables you to set the kind of channel(s) that show during the initial connection.
- Add Site: Click this button to add DVR site. You are allowed to register up to 4 DVR sites.
y Delete Site: use this button to delete the already registered DVR site(s).
y E-map Setup: Use this to upload saved E-map image file (see 10.2 E-map).
y Popup Display: Setup for beep and popup displays when event input.