User`s manual

UNIX User’s Manual (4.1.1.0)

* Video Signal Type: Select either

NTSC or PAL.

* Auto Channel Scan: It

automatically identifies all the

active video channels. Make sure

to always click and scan after S/W

version change.

* Default: It sets “Event Recording

Frame” and “Recording Frame” as

default values.

Different resolutions and recording

frame rates can be set up for

different cameras.

Cameras will be enabled by

checking the boxes.

3.5.2.1 Camera

[Camera]

Select recording picture quality.

Double-click on “Camera”for

more individual Camera setup.

* Pre-alarm (max. 10 sec.): Length of time to be recorded before event

* Post-alarm (max. 60 sec.): Length of time to be recorded after event