User`s manual

CH 1 Product Introduction

[Rear Panel]

3.VIDEO IN

2.FAN

6. LAN

7.SPOT

5. VGA

4.HDMI

8. DC 12V

9.SENSOR IN / RELAY / RS485

11. AUDIO IN

1.EXTEND

(option)

1. EXTEND (option) : Connect EXTEND FTP cable to VGA or HDMI Receiver

2. Fan : Cooling Fan

3. VIDEO IN : This receives images from SDI cameras or any camera.

4. HDMI : Real HD(1920X1080) output for high resolution monitor

5. VGA : video output for VGA display

6. LAN : This is the Gigabit Ethernet LAN cable connection terminal.

7. SPOT : For spot CRT monitor, composite signal comes out.

8. DC 12V : DC12V 4.16A or up

9. SENSOR IN : This terminals can be connected to external sensors.

RELAY : This terminal blocks connect external electric devices to the product

(Warning Lamp and others).

RS485 : For control the pan and tile cameras. Make sure that the polarity.

10. AUDIO OUT : RCA audio out terminal.

11. AUDIO IN : RCA audio in terminals. You can record 4 channels at the same

time.

v For more details, refer to [CH 2. Installation Method and Cautions].

10. AUDIO OUT