User`s manual

CH 1 Product Introduction

9. SPOT

7. DC12V

13. AUDIO OUT

14. SENSOR IN / RS485, ALARM OUT

2.VIDEO IN

10. LAN

3. e-SATA

5. VGA

4.HDMI

8. POWER SWITCH

12. EXTEND

11. RS232C

1. AUDIO IN

6. USB

[Rear Panel]

1. AUDIO IN : RCA audio in terminals. You can record 8 channels at the same

time.

2. VIDEO IN : This receives images from cameras and sends them to monitors.

3. e-SATA

4. HDMI : Real HD(1920X1080) output for high resolution monitor

5. VGA : video output for VGA display

6. USB : This USB port is for mouse and USB devices.

7. DC 12V : DC12V 12.5A or up

8. Power Switch(ON/OFF)

9. SPOT : For spot CRT monitor, composite signal comes out.

10. LAN : This is the Gigabit Ethernet LAN cable connection terminal.

11. RS232C : This is Serial communication(RS232C) cable connection terminal.

12. EXTEND (option) : Connect EXTEND FTP cable to VGA or HDMI Receiver

13. AUDIO OUT : RCA audio out terminal.

14. SENSOR IN : This terminals can be connected to external sensors.

RELAY : This terminal blocks connect external electric devices to the product

(Warning Lamp and others).

RS485 : For control the pan and tile cameras. Make sure that the polarity.

v For more details, refer to [CH 2. Installation Method and Cautions].