EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Manual Remark： Eyeride reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. All copyrights reserved.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Table of Contents 1. Product Overview 1.1 Simply Description……………………………………………………………… 1.2 Main Feature.…………………………………………………………………… 1.3 Specification…………………………………………………………………… 2. Hardware Description 2.1 Product Appearance…………………………………………………………… 2.1.1 Front Panel……………………………………………………………………………… 2.1.2 Back Panel……………………………………………………………………………… 2.2 Reboot…………………………………………………………………………… 2.3 System Requirements………………………………………………………… 2.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.4 Service…………………………………………………………………………… 4.4.1 Dynamic DNS…………………………………………………………………………… 4.5 Network…………………………………………………………………………… 4.5.1 Interfaces ……………………………………………………………………………… 4.5.2 Wireless…………………………………………………………………………………… 4.5.3 DHCP/DNS、Hostnames, Static Routes……………………………………………… 4.5.4 Firewall…………………………………………………………………………………… 4.5.5 Diagnostics………………………………………………………………………………… 4.6 Log Out…………………………………………………………………………… 4.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 1. Product Overview 1.1 Simply Description EYENET V1.2 provide an easy way to expend your wired Ethernet to wireless. It work well on gateway, and you could configure it via Web. It could meet both enterprise and the home’s requirements economically, its user could browser the internet and time and anywhere. It has multi-function ,high-performance and easy install. Will be your best choice to build your own WLAN.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Pic 2-1 Front Panel Indictor LED (Will adjust with the specific mode) Indictor LED Description Function POWER Power LED Keep ON - Power in Keep Off - No Power PCIE PCIE Flashing - PCIE module work Keep Off - PCIE module not work LAN LAN LED On - The relevant port connect Off - No connect to the relevant port Flashing- Data transmission on the relevant port WLAN Wifi LED Off - Wireless function unable On - Wireless function enable
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Pic 2-2 Back Panel Port(Will adjust with the specific mode) Port Description Function DC Power Port Connect the supplied power adapter.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 2.2 Rest If you want to rest to the factory default settings, please refer the below steps 1) To plug the power adapter. 2) When the router works normally, press the REST/WPS button for 8 seconds. 3) All the router’s LEDs will off and then on again, wait until it work normally. 4) When above 3 steps done, the router will rest to the factory default setting. Warming: Before steps finishing, don’t cut the power off, or it will break your router.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 If it shows as below, it means fail When it fails to connect, you could check as below. 1)：If the hardware connect in right way? >>The relevant LED to the PC must be on 2)：If your PC’s TCP/IP sets right? >>If the IP of the device is 192.168.1.1 , your PC’s IP must be 192.168.1.xxx(xxx should be 2~253) 4. Configuration Guide 4.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4-1 Log in webpage When everything goes well, the browser will show as the 4-2. There are several tag, click some tag, you could configure relevant function settings. 4-2 I will explain each menu. 4.2 us 4.2.1 Overview Click the “Overview” You could check the running information, included system information, Memory, network, DHCP leases, wireless and associate stations, as 4.2.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.2.1 Status System: Router name, Router model, Firmware version, Kernel version, Local Time, Uptime, Load average. Memory: Total available , Free, Caches, Buffered Network: The connection status of the WAN port. DHCP Leases: Show the IP address ,MAC, and the Lease time Wireless: It is about the wireless status , will included SSID, Mode, Work Channel, Bitrates, the MAC of the wireless interface , the Encryption of the transmission.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.2.2 Firewall Click the firewall tag, you could check the firewall status of the device 4.2.2 4.2.3 Routing List Click the status-routes, you could check the routing list of the device, the currently active on the device.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.2.3 4.2.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.2.4 4.2.5 Kernel Log Click the Kernel Log , you could check some information about the device’s system 4.2.6 Processes Click the processes, you could check an overview over currently running system processes and their status. Such as CPU usage, Memory usage. You could hang up ,terminate or even kill the program, depends on your requirements. As the 4.2.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.2.6 4.2.7 Realtime Graphs Click the Realtime Graphs ,you could check the load, traffic, wireless and connection of the device.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 图 4.2.7 4.3.1 System Click the System tag, you could check and edit some basic information of the device, including Local time, Hostname, time zone.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.3.1 4.3.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.3.3 Software Click the software page, you could download and install the package , do not operate it without a professional engineer. 4.3.4 Start-up Click to the Start-up page, You can enable or disable installed init scripts here. Changes will applied after a device reboot, do not operate it without a professional engineer. 4.3.5 Schedule Tasks This is the system crontab in which scheduled tasks can be defined.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.3.6 Mount Points, LED Configuration Do some edition about the system , do not operate it without a professional engineer. 4.3.7 Backup/Flash Firmware You could upgrade the firmware or backup it in this page, as below. 4.3.7 4.3.8 Reboot Select menu system to restart, you can restart your device. When you click the Reboot tag, the device will reboot.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.4. Service 4.4.1 Dynamic DNS Dynamic DNS allows that your router can be reached with a fixed hostname while having a dynamically changing IP address 4.5 Network 4.5.1 Interfaces Click the Interface tag, you could check the wired port’s status and edit it. 4.5.1 4.5.2 Wireless Click the Interface tag, you could check the wireless port’s status and edit it.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.5.2 4.5.3 DHCP/DNS、Hostnames, Static Routes, You could edit these setting in relevant page. do not operate it without a professional engineer. 4.5.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Pic 4.5.4 4.5.5 Diagnostics With Diagnostics you can choose the network utilities Pic 4.5.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 4.6 Log out Click the Log Out tag, you will log out the website. More details about the system. Please refer the https://openwrt.org/ 4.7 Flash Firmware Operate this keep the router connecting computer status. First, use sharp item Pressing the RESET button as “Picture 1” below, then power on the router. 1 2 Second, set the computer TCP/IP in to static IP 192.168.1.X ( X means any number between 2 to 255 ) and Subnet mask into 255.255.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Third,key in 192.168.1.1 into browser, come into “ Firmware recovery page” as below pic. (this system developed based on Chinese ,so the page shows Chinese word) Click “ Browser ” button find the firmware “root_uImage.uImage” from your computer, double click “root_uImage.uImage” to hang on it.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 About 100seconds, the file upload success will show “升级完毕” as below picture show.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 Fourth, Set the computer TCP/IP into automatic obtain IP
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 5. FAQ 1、LAN LED off It is about the hardware connection issue, you could check follow below steps To check if the Ethernet cable plug into the port firmly. To check if the network device is power on Make sure the Ethernet cable are working well 2、The device work normally after setting . But the link will become unsteady after working some time, such as delay and package dropping.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 To check if each part of the connection are steady. If the signal strength are too weak, you can try to change the work channel, in order to reduce the reference. Reboot the device. Reset to the factory default setting. After all the above steps, if it still have the same questions, please contact to the reseller or our FAE.
EYERIDE LLC 2520 SW 30th Ave, Hallandale Beach, Florida 33009 -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
