Product Manual

16
Step 5: Positioning
You will need to be within an appropriate distance from the eye gaze camera before starting the
calibration process.
➢ If the circle is red, the Seemore character will prompt you to move closer or further away from
the EyeOn.
➢ If the circle is green, you are in the correct position and ready to begin calibration.
Incorrect Position (Red Circle)
Correct Position (Green Circle)
The calibration process will automatically start after the circle shows green for more than five seconds.
Alternatively, you can also press the “Start Calibration” button using the touchscreen input.
The “X” in the bottom right corner can be used to close out of the QuickACCESS setup tutorial.
Tip: By default, EyeGaze calibration tracks based on both eyes. This can be adjusted to just the Left or
Right eye if necessary. See “Tracking Type” in the top-right corner of the calibration setup tutorial. This
setting can be useful for those who have amblyopia or ptosis.