FCC Notices EYEZONE B1080P-5 It’s herewith confirmed to comply with the requirements of FCC Part 15 Rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
CONTENTS 1. 2. 3. 4. 5. Package Contents……..……………………………………….. Introduction……………….……………………………………... Features………………………….……………………………… Hardware Overview……………………..……………………... Remote Control……………………………..………………….. 5.1 Entering Text or IP Address……………..………………… 6. Start the B1080P-5……………………………..………………. 7. Setting Up……………………………………………………….. 7.1 Network Setup………………………………………………. 7.2 FTP Setup…………………………………………………… 7.3 Video Setup…………………………………………..…….. 7.4 Other Setup…………………………………………..…….. 7.5 3.5G Setup…………………..
. FEATURES Supports multiple file formats: HD WMV9 and WMA. Supports Video, S-Video, Y.Pb.Pr, HDMI, VGA and Audio output. HD Y.Pb.Pr output supports resolution: NTSC Mode(60Hz): 480P/ 720P/ 1080i. PAL Mode(50Hz): 576P/ 720P/ 1080i. HDMI Output: 480P/ 720P/ 1080i/ 1080P. VGA output supports resolution: 640x480/ 800x600/ 1024x768/ 1280x1024/ 1360x768. Supports RS-232 port for computer control with ASCII command (play, stop, pause…etc). Built-in 3.5G module for accessing to the Internet.
5. REMOTE CONTROL 6.
7.1 NETWORK SETUP (continued) 7. SETTING UP In the main menu, using the “▼” button on remote control to select the “SETUP” item, then server or you want to use Local FTP Server function, enter the fixed IP address, Mask, Gateway press the “ENTER” button. You will be presented with the Eyezone B1080P-5 settings screen. and DNS for the Eyezone B1080P-5. You can also press the “SETUP” button on remote control to directly open the settings screen. PS. Refer to 5.
7.2 FTP SETUP NOTE: GMT and applied regions Time Zone Region (GMT+02:00) (GMT-11:00) Midway, Ireland, Samoa (GMT+03:00) Nairobi (GMT+03:00) Moscow, Saint Petersburg, Volgograd (GMT-10:00) Hawaii (GMT-09:00) Alaska Pacific GMT (U.S. & Canada); Tijuana Helsinki, Riga, Tallinn (GMT+03:00) Baghdad (GMT+03:00) Kuwait, Raid Local FTP Server: Turn on/ off the Eyezone B1080P-5 server. (GMT-07:00) Continental GMT (U.S.
② Local Time: Set the system time manually. 7.4 OTHER SETUP NOTE: If the NTP Server and Local Time have been set, the NTP Server will be the first priority (the Eyezone B1080P-5 is already connected to the network). ③ Download Time: Set the FTP auto-download time. Local HTTP Server: Enable/ Disable the HTTP command function. Local HTTP Server Setup: To set the “Port”, “User ID” and “Password” of the Eyezone B1080P-5.
7.4 OTHER SETUP (continued) 7.5 3.5G SETUP Export Setting File: Press the “Enter” button to export the configuration value to the CF card. Copy the file “HDPlayerSetting.txt” on CF card to your PC. Use the “Wordpad” to open the file, and you can see all the configuration value of B1080P-5. You can modify directly the configuration value on your PC. Example.
8.2 DIAL-UP TO INTERNET 8. 3.5G CONNECTION Step1. Insert the CF card with the completed file “HDPlayerSetting.txt” to the B1080P-5. 8.1 SETTING UP Step2. Turn on the B1080P-5, and it will dial-up and connect to cell phone system network automatically. If the Dial-up process is successful, the following screen will display. Supports HSDPA, UMTS & GPRS System Please use your Cell Phone to disable the PIN Code setting on SIM Card first. Set the APN (Access Point Name) Step1.
8.3 SETUP THE DDNS FUNCTION 9. USING THE B1080P-5 Step1. Please connect to http://www.dyndns.org/ Step2. If you own one account, please login or you need to sign up a new one. 9.1 PLAY MEDIA FILES ON THE CF CARD Step 1: Insert the CF card with media files, then turn on the Eyezone B1080P-5 and press the “ENTER” button on the remote control when “’mnt/CF” is highlighted to take you into the CF card. Step3. Connect to the Page” My Services...” and click Add Zone Services Step4.
9.1.1 Using the Remote Control When Media File Is Playing PAUSE/STEP: Pause the playback or play frame by frame. SETUP: Press the button to adjust the brightness, contrast or saturation while the movie or picture ZOOM: Zoom in/ out on the movie or picture. is playing. With the “+ VOLUME –” button. - First Press: Adjust the brightness. - Second Press: Adjust the contrast. - Third Press: Adjust the saturation.
9.2 DOWNLOAD FUNCTION For example. Before it downloading files from the FTP server, Eyezone B1080P-5 will delete all contents on CF card - “FTP port number” of three groups for login ftp server. except the file on the CF card and the FTP server are the same. Group 1: User name: ipmedia/ Password: 0000/ FTP port number: 21 9.2.1 Manual Download Function Group 2: User name: ipmedia2/ Password: 1111/ FTP port number: 21 Please confirm that the Eyezone B1080P-5 is already connected to the network.
9.2.3 Download Pause / Resume 9.3 PLAY THE MEDIA FILES ON THE PC The Eyezone B1080P-5 supports download pause/resume. You can press the “STOP” button to pause downloading media files. The Eyezone B1080P-5 can continue unfinished downloads upon next Step 1: Please download and install Windows Media Player Version 11 on your PC first. session. Step 2: Launch the Windows Media Player Version 11 and the window below will appear.
Step 5: Click the “Library” tab, and then click “Media Sharing”. Step 8: Confirm that the Eyezone B1080P-5 is connected to the network. In the list of devices below the “Share my media to” check box, select the device (Eyezone B1080P-5), and click “Allow” to share the media files. Step 6: Select the “Share my media”, and click “OK”. Step 9: The shared folder will appear on the screen of the Eyezone B1080P-5. Select the folder and click the “ENTER” button on remote control to go into the folder.
Step 11: Select the file you want to play, and press “ENTER” or “PLAY” button on the remote control to Step 3: Please setup your router or firewall, and open a port 21 for the Eyezone B1080P-5. The play the file. following figure is an example, please refer to your user’s manual of router for opening ports. NOTE: If the media files shared from PC are not listed on screen, restart your PC. 9.
Method 2: Connect by FTP Tools 9.5 RS-232 FUNCTION (RS-232 cable is optional) For example. Use the tool “Tera Term” or other tools to control the Eyezone B1080P-5 with ASCII command. NOTE. 1.Baud Rates: - Firmware Updating: Set up the baud rate as “115200”. - ASCII Command: The available baud rates is “38400”. 2. The reaction time of B1080P-5 is around three seconds. - If there are multiple Eyezone B1080P-5, you can use the “CuteFTP” tool to connect and manage files easily.
10.1 PLAYER CONTROL 10. HTTP COMMAND FUNCTION Confirm that the Eyezone B1080P-5 is already connected to the network. (Refer to 7.1) Confirm the “Local HTTP Server” function has been enabled, and the “Local HTTP Server Setup” set has been completed (refer to 7.2). Set your router or firewall, and open a port 80 for the Eyezone B1080P-5. The following figure is an example, please refer to your user’s manual of router for opening ports.
10.1 PLAYER CONTROL (continued) 10.2 NETWORK SETUP Auto Download: Click “Send” to execute the auto download function immediately. Note: The “FTP Auto Download” function must be turned on and completed set. Stop Auto Download: Click “Send” to stop the auto download function immediately. Connect FTP Server: Click the FTP server address to connect to the B1080P-5, and enter the user name and password (Default User Name: root, Default Password: admin) to log on.
11. SCHEDULE FUNCTION 10.3 TIMER SETUP NOTE: The “NTP Server” or “Local Time” must be set before using the Schedule Function. (refer to 7.2) 11.1 INSTALL THE SCHEDULE SOFTWARE Execute “setup.exe” to install the Schedule software in the CD driver, and finish the installation procedure in accordance with the illustration below. NTP Timer: Set the NTP Server and Time Zone. Auto Download: Set the auto download time. Remote FTP: Set the Remote FTP Server.
11.2.1 Basic Schedule Remove: Click this button to remove the file from the list. In the “Basic Schedule” mode, you can select files that you want to play and the set up the play times of Select the file that you want to remove from the list, and press the “Remove” button to delete. each file. Add: Click this button to add a file. The following diagram appears: Click the “Browser” button to search for files that you want to add. You can also set up the “Play Times” of the file in the window.
11.2.2 Advance Schedule Step 3: Repeat the steps 1〜2 to add other files. In the “Advance Schedule” mode, you can select files that you want to play, and can also set up the play times, and the initial and end time of each file. There are “Time Setup” and “File Setup” in the “Advance Schedule”. Step 4: After finishing all setup, press the “SAVE” button, and a pop-up window will appear. Select the path, then click the “SAVE” button to save. NOTE: Do not rename the file (eyezone.
Date Setup Error! ! There are some errors in the “Advance Schedule”. Check the date/ time of the schedule for conflict or error. 12. OPTIONAL AUXILIARY EQUIPMENT 12.1 PLAY-BUTTON BOX (Eyezone BB) No any schedule file in advance schedule! !Can’t Save! ! There is no schedule file in the advance schedule. Please add files that you want to play in the advance schedule. 11.3 APPLY THE SCHEDULE ON THE B1080P-5 Put the “eyezone.
12.3 PIR SENSOR (Eyezone PIR) 12.4.2 Demo Files Ex. Using the wireless 5 Touch-Sensor Buttons Application 1: The Eyezone PIR is an external remote control receiver. Application 2: The Eyezone PIR is a motion detector. Put 6 demo files on CF card. (1 default file and 5 demo files) NOTE: :The files are sorted by filename in ascending order alphanumerically (numbers < upper case letters < lowercase letter). Each button is mapped to a file by this order.
13. TROUBLESHOOTING Situation Check Point 1. Insert the CF card before turning on the B1080P-5. 2. Check power cable and power switches. 3. Ensure the video cables are connected between the player and the Eyezone B1080P-5. No Picture 4. Press the “TV MODE” button on the remote control to select the correct output mode. 5. Make sure the file format on the CF card is correct. 6. Check if the display device is switched to correct video input source. 1.