Instructions / Assembly

-2-
ASSEMBLY MANUAL
EZ-ACCESS
®
Gateway™ Solid Surface Portable Ramp
ATTENTION INSTALLER:
 For residential use only!
 RATED LOAD: 850 pounds. NEVER EXCEED RATED LOAD.
 Read all instructions, including MAINTENANCE AND SAFETY, prior to ramp assembly.
 Please leave this ASSEMBLY MANUAL with the end user.
ATTENTION END USER:
 RATED LOAD: 850 pounds. NEVER EXCEED RATED LOAD.
 Please read and become familiar with the MAINTENANCE AND SAFETY section of this manual.
TOOLS TYPICALLY REQUIRED:
 1/2″ socket or 1/2″ wrench
 1/4″ drill bit (1/4″ masonry drill bit when installing to concrete porch, step, etc.)
 Rubber mallet
 Power drill
 Digging tools (if an obstacle needs to be removed)
VIEW PACKING LIST:
 Each system is shipped with a packing list. Be sure to check that all items are present before starting
assembly/installation.
CONTENTS
SECTION 1: BASIC SAFETY AND WARNINGS
SYMBOL MEANING .......................................................................................................... 3
WARNINGS ....................................................................................................................... 3
SECTION 2: AVAILABLE GATEWAY RAMPS ....................................................................... 4
SECTION 3: FASTENING RAMP TO THE LANDING ............................................................. 5
SECTION 4: INSTALLING RAMP HANDRAILS (OPTIONAL) ............................................. 6-7
SECTION 5: FINAL STEPS..................................................................................................... 8
SECTION 6: MAINTENANCE & SAFETY ............................................................................... 8
SECTION 7: INCLINE CHART ................................................................................................ 9
SECTION 8: WARRANTY ....................................................................................................... 9