Full Product Manual

GATEWAY
®
3G Solid Surface Portable Ramp Instructions Page 5 of 13
PACKAGE CONTENTS, CONT’D.
QTY
DESCRIPTION
IMAGE
(NOT SHOWN TO ACTUAL SIZE)
2
UPPER END LOOP
Shown with O-ring and Attachment Screw
(If handrails were purchased)
2
LOWER END LOOP
Shown with O-ring and Attachment Screw
(If handrails were purchased)
4
SCREW
1/4” Self-drilling, Self-tapping Hex Washer Head
(If handrails were purchased)
4
SCREW
#10 x 1/2” Pan Head Phillips Self-drilling
(If handrails were purchased)
4
O-ring
(If handrails were purchased)
1
INSTRUCTION MANUAL
3. AVAILABLE RAMP LENGTHS AND STYLES
3.1. The ramp is available in 3-, 4-, 5-, 6-, 7-, 8-, 9-, and 10-ft. lengths and comes with a self-adjusting
lower transition plate and a fixed top lip transition plate.
Ramp lengths of 3-ft. through 8-ft. have 2-in. curbs; the 9-ft. and 10-ft. lengths have 4-in.
curbs.
3.2. Shown below is the 6-ft. ramp without handrails (FIG. 1), the 6-ft. ramp with Two-Line handrails
(FIG. 2), and the 6-ft. ramp with Vertical Picket handrails (FIG. 3).
FIG. 1
FIG. 2
FIG. 3