Instructions / Assembly

Page 12 of 74
2. PLATFORMS
2.1. INSTALL PLATFORMS
If your system does not include a platform, skip to ‘CONNECT RAMP SECTIONS’.
Platform handrails are shown for clarity of how to orient platforms in various
configurations. It is strongly suggested that all platforms and ramps be installed before
installing handrails (see ‘HANDRAILS’ section).
2.1.1. There are four basic platform arrangements (one or more of these platform
arrangements may be used in an installation). All four require the same procedure for
assembly except for FIG.2.3 which requires an additional PPPC (PLATFORM TO
PLATFORM CONNECTOR).
FIG. 2.1 Platform in straight configuration.
FIG. 2.2 Platform in turn configuration.
FIG. 2.3 Platforms in turn back configuration (two 5' x 4' platforms
shown combined to make 5' x 8’ turn back).
FIG. 2.4 8’ x 5’ turn back platform.
FIG. 2.1
FIG. 2.2
FIG. 2.3
FIG. 2.4