Manualshelf

Instructions / Assembly

ManualsBrandsEZ-ACCESS ManualsAccessibility RampsPATHWAY 3G 16 ft. Ramp Kit with Expanded Metal Surface and Two-line Handrails
41424344454647484950
Page 41 of 74
4.9.16. After installing the ramp handrails, insert the Short Side Vertical Picket on the
“short” side of the 45° Angle Platform. Align the bottom of the posts with the
bottom of the corner pockets and tighten the set screws securely. Install angle
caps on top of the posts. Refer to Section 4.6 for installing platform handrails and
attaching angle caps (FIG. 4.21).
4.9.17. Insert adjustable elbows into both the ramp handrails and install the 1-1/2”
diameter handrail tubes in the same manner as described in ‘HANDRAILS’ section
and shown (FIG. 4.22).
FIG. 4.21
FIG. 4.22