Full Product Manual

PATHWAY

3G Modular Access System Assembly Manual Page 46 of 77

FIG. 4.21

4.6.22.

Install an adjustable elbow in the last open ramp handrail and align with the adjustable

elbow at the split between the Vertical Picket panels. Measure the gap between the large

round faces, trim a 1-1/2” diameter handrail tube to fit the gap, and install the handrail

tube (FIG. 4.22). The procedure for installing the 1-1/2” diameter handrail tubes and

adjustable elbows is the same as installing the closure top rail.

4.6.23.

Secure the Handrail Support Bracket to both the 1-1/2” diameter handrail tube and the

top rail of the Vertical Picket panel using two #8-18 x 1/2” hex washer head self-drilling

screws. Orient the attachment leg of the Handrail Support Bracket away from the

platform as shown (FIG. 4.23).

4.6.24.

Ensure all fasteners on both sides are tightened securely.