PATHWAY® 3G MODULAR ACCESS SYSTEM TECHNICAL & ARCHITECTURAL SPECIFICATIONS Manufactured in the USA © Homecare Products, Inc. All rights reserved. All text and images contained in this document are proprietary and may not be shared, modified, distributed, reproduced, or reused without the express written permission of EZ-ACCESS®, a division of Homecare Products, Inc.
SPECIFICATIONS Ramps 36” WIDE RAMPS 48” WIDE RAMPS 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 6’ RAMP 7’ RAMP 8’ RAMP 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 6’ RAMP 7’ RAMP 8’ RAMP Made of Aluminum Slip Resistant Walking Surface Weight – Solid (lbs.) 16.1 22.6 29.2 35.7 42.3 48.8 55.3 25.4 35.3 45.2 55.1 65 74.9 84.8 Weight – Expanded Metal (lbs.) 17 23.7 33 39.7 46.5 53.3 60.
Platforms – Solid Surface 4’ x 4’ W/4’ HR 4’ x 5’ W/5’ HR 4’ x 5’ W/TURN HR 5’ x 4’ W/4’ HR 5’ x 4’ W/TURN HR 5’ x 5’ W/5’ HR 5’ x 6’ W/6’ HR 5’ x 6’ W/TURN HR 6’ x 5’ W/5’ HR 6’ x 5’ W/TURN HR 6’ x 6’ W/6’ HR 8’ x 5’ HR 45° Made of Aluminum Slip-resistant Surface 57.2 61.8 61.8 61.3 61.3 71.9 82.6 82.6 82 82 94.2 109.8 29.4 69.5 80.8 79.7 78.1 79.2 90.9 103.6 102.6 101 102 115.2 141.
Platforms – Solid Surface – Low Profile 4’ x 5’ W/ 4’ HR 4’ x 5’ W/ 5’ HR 4’ x 5’ W/ TURN HR 5’ x 5’ W/ 5’ HR 8’ x 5’ W/ HR Made of Aluminum Slip-resistant Surface 69.2 69.2 69.2 82.7 140.7 86.0 88.2 87.1 101.7 176.5 89.8 92.8 91.3 106.3 184.9 94.0 97.6 95.8 111.1 193.9 105.6 112.0 108.8 125.5 219.9 Weight Capacity (lbs.) 1,000 1,000 1,000 1,000 1,000 Useable Dimensions 48” x 60” 48” x 60” 48” x 60” 60” x 60” 96.25” x 60” 53.5” x 65.
Platforms – Expanded Metal Surface 4’ x 4’ W/4’ HR 4’ x 5’ W/5’ HR 4’ x 5’ W/TURN HR 5’ x 4’ W/4’ HR 5’ x 4’ W/TURN HR 5’ x 5’ W/5’ HR 5’ x 6’ W/6’ HR 5’ x 6’ W/TURN HR 6’ x 5’ W/5’ HR 6’ x 5’ W/TURN HR 6’ x 6’ W/6’ HR 8’ x 5’ HR 45° Made of Aluminum Slip-resistant Surface 58.1 68.6 68.6 67.9 67.9 80.2 92.5 92.5 94.9 94.9 109.5 117 30.3 74.9 87.6 86.5 84.7 85.8 99.2 113.5 112.5 113.9 114.
Transition Plates (Ramps) UPPER (36” Ramp) LOWER (36” Ramp) GROUND (36” Ramp) UPPER (48” Ramp) LOWER (48” Ramp) GROUND (48” Ramp) Made of Aluminum Raised Tread Surface Length (Useable)1 3.5” 6” 18” 3.5” 6” 18” 35.375” 35.375” 35.375” 47.375” 47.375” 47.
ARCHITECTURAL SPECS Part 1 – General 1.1 DESCRIPTION OF PRODUCT a. The product described herein, manufactured by EZ-ACCESS (‘manufacturer’), is an aluminum modular ramp consisting of ramp sections, platforms, rails, and supports that are selected to provide adequate ramping height. 1.2 QUALITY ASSURANCE a. The ramp may be subject to state, local, and city approval prior to installation and subject to inspection after installation. 1.3 REFERENCE CODES a.
Part 2 – Overview 2.1 OVERVIEW a. All PATHWAY 3G ramps and accessories shall be prefabricated modular units as manufactured by EZ-ACCESS. These ramps shall be modular in design to allow for easy of assembly and relocation. 2.2 RAMPS a. ENGINEERING 1. Ramp sections shall be designed to 2018 International Residential Code (IRC) with a minimum uniform live load of 40 lbs. per square foot (PSF) and a concentrated vertical load of 300 lbs. b. MATERIALS 1.
2.5 HANDRAILS a. MATERIALS 1. Handrails shall be all aluminum construction from alloys 6005-T5 OR 6061-T6. b. DESIGN AND FABRICATION 1. Handrails shall be provided along both sides of ramp segments. The inside handrail on turn platforms and dogleg ramps shall always be continuous. Gripping surfaces shall be continuous, without interruption by newel posts, other construction elements, or obstructions. 2. Handrails shall be 1.5” diameter. 3.
PART 4 – COMPONENT-ILLUSTRATIVE CONFIGURATIONS PLAN VIEW ELEVATION VIEW ISOMETRIC VIEW
POLYMER FOOT