PATHWAY® 3G MODULAR ACCESS SYSTEM TECHNICAL & ARCHITECTURAL SPECIFICATIONS Manufactured in the USA © Homecare Products, Inc. All rights reserved. All text and images contained in this document are proprietary and may not be shared, modified, distributed, reproduced, or reused without the express written permission of EZ-ACCESS®, a division of Homecare Products, Inc.
SPECIFICATIONS Ramps 36” WIDE RAMPS 48” WIDE RAMPS 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 6’ RAMP 7’ RAMP 8’ RAMP 2’ RAMP 3’ RAMP 4’ RAMP 5’ RAMP 6’ RAMP 7’ RAMP 8’ RAMP Made of Aluminum Slip Resistant Walking Surface Weight – Solid (lbs.) 16.1 22.6 29.2 35.7 42.3 48.8 55.3 25.4 35.3 45.2 55.1 65 74.9 84.8 Weight – Expanded Metal (lbs.) 17 23.7 33 39.7 46.5 53.3 60.
Platforms - Solid Surface 4’ x 4’ W/4’ HR 4’ x 5’ W/5’ HR 4’ x 5’ W/TURN HR 5’ x 4’ W/4’ HR 5’ x 4’ W/TURN HR 5’ x 5’ W/5’ HR 5’ x 6’ W/6’ HR 5’ x 6’ W/TURN HR 6’ x 5’ W/5’ HR 6’ x 5’ W/TURN HR 6’ x 6’ W/6’ HR 8’ x 5’ HR 45° Made of Aluminum Slip-resistant Surface 57.2 61.8 61.8 61.3 61.3 71.9 82.6 82.6 82 82 94.2 109.8 29.4 69.5 80.8 79.7 78.1 79.2 90.9 103.6 102.6 101 102 115.2 141.
Platforms - Expanded Metal Surface 4’ x 4’ W/4’ HR 4’ x 5’ W/5’ HR 4’ x 5’ W/TURN HR 5’ x 4’ W/4’ HR 5’ x 4’ W/TURN HR 5’ x 5’ W/5’ HR 5’ x 6’ W/6’ HR 5’ x 6’ W/TURN HR 6’ x 5’ W/5’ HR 6’ x 5’ W/TURN HR 6’ x 6’ W/6’ HR 8’ x 5’ HR 45° Made of Aluminum Slip-resistant Surface 58.1 68.6 68.6 67.9 67.9 80.2 92.5 92.5 94.9 94.9 109.5 117 30.3 74.9 87.6 86.5 84.7 85.8 99.2 113.5 112.5 113.9 114.
Transition Plates UPPER LOWER GROUND Made of Aluminum Raised Tread Surface Length 3½” 6” 18” Width 35⅜” 35⅜” 35⅜”
ARCHITECTURAL SPECS Part 1 – General 1.1 DESCRIPTION OF PRODUCT a. The product described herein, manufactured by EZ-ACCESS® is an aluminum modular ramp consisting of ramp sections, platforms, rails, and supports that are selected to provide adequate ramping height. 1.2 QUALITY ASSURANCE a. The ramp may be subject to state, local, and city approval prior to installation and subject to inspection after installation. 1.3 REFERENCE CODES a.
Part 2 – Overview 2.1 OVERVIEW a. All EZ-ACCESS PATHWAY 3G ramps and accessories shall be prefabricated modular units as manufactured by EZ-ACCESS. These ramps shall be modular in design to allow for easy of assembly and relocation. 2.2 MATERIALS a. ENGINEERING 1. Ramp sections shall be designed to 2018 International Residential Code (IRC) with a minimum uniform live load of 40 lbs. per square foot (PSF) and a concentrated vertical load of 300 lbs. b. MATERIALS 1.
2.4 SUPPORT LEG ASSEMBLIES a. ENGINEERING 1. All support assemblies shall be designed to support the ramp and platform sections specified in sections 2.2 and 2.3. 2. Support assemblies shall be designed to hold the support tubes and legs vertical in all locations. 3. Support tubes and legs shall have a minimum wall thickness of .094”. b. MATERIALS 1. Support assemblies shall be constructed of aluminum alloys 6005-T5 or 6061-T6 with polymer feet. 2.
PART 3 – EXECUTION 3.1 EXAMINATION a. Verify site conditions are conducive to proper assembly of product. 3.2 ASSEMBLY a. Install prefabricated aluminum ramps according to manufacturer’s instructions and the approved drawings without damage to components, shape, or finish. Repair or replace any damaged components. b. Align and maintain uniform slope and horizontal joints as installation progresses. c. Fasten components in place as indicated in shop drawings or plans. d.
PART 4 – COMPONENT-ILLUSTRATIVE CONFIGURATIONS PLAN VIEW ELEVATION VIEW
ISOMETRIC VIEW
POLYMER FOOT