Instructions / Assembly

Equipment Hangers

Upper Equipment Hanger

Lower Equipment Hanger

Parts List

Green Pole

x10

3-Way

Corner

Equipment

Hanger Ends

Straight

Connector

Fit right side of tent over frame as shown.

Step 5

Step 6

Red Pole

x10

EZCL-128-TNT-1

Pull back of tent over frame and zip.

PAGE 1
Step 5 Fit right side of tent over frame as shown. EZCL-128-TNT-1 Step 6 Pull back of tent over frame and zip.
PAGE 2
Step 1 Straight Connector Step 3 Insert ceiling poles into strait connectors and 3-way corners. Fit equipment hanger ends to poles. Position equipment hangers as required. Lay out base. Assemble floor poles, straight connectors and 3-way corners as shown. Straight Connector 3-Way Corner Step 2 Insert wall poles into 3-way corners. Fit 3-way corners on top. Step 4 3-Way Corner Fit left side of tent over frame as shown.