Owner's manual

SATA HDD Duplicate Controller Manual

3.10.3 Compare Firmware

This function is used to compare the current system firmware version with the new version the user

is upgrading to. This ensures that the downloaded firmware is the latest version. The message

"Last update F/W" indicates that it is the latest version.

8-04.Adv Setup

Compare Firmware

Searching F/W ...

Please Wait ...

Last update F/W

OK!

3.10.4 Quick Erase HDD

This function is used to quickly erase all data on the HDD. Please backup any important data

before using this function.

9-04.Adv Setup

Quick Erase HDD

Press ENT to enter the following screen. Use the Up and Down buttons to select the HDD to

erase.

Quick Erase HDD

ALL/Target CH:*

Press ENT again and the LCD will prompt you to confirm the erase operation.

All data will be

lost,Erase? No

Attention: This is Function 9.5 of 1-1 HDD duplicator.

3.10.5 Full Erase HDD

This function is used to full erase all data on the HDD. Please backup any important data before

using this function.

9-05.Adv Setup

Full Erase HDD

Press ENT to enter the following screen. Use the Up and Down buttons to select the HDD to

erase.

Quick Erase HDD

ALL/Target CH:*

Press ENT again and the LCD will prompt you to confirm the erase operation.

All data will be

lost,Erase? No

Attention: The operation may take a long time, and 1-1 HDD duplicator does not have this function.