User Manual

II. Function Introduction

6. Select Source

You can set any drive or built-in HDD in the duplicator to be your source

reader.

1. Using / to select 6.Select Source

2. Press to check the current source reader, or select the proper drive

to be the source reader by pressing / , once the source reader is

selected, press to confirm the setting and back to the menu list.

**Note:

The default setting of source reader is the first drive.

7. Utility

7-1. Information

You can check the information of disc, drive and system by this function. By

pressing / , each disc or drive’s information will show on the LCD.

1. Using / to select 7.Utility, press to enter the sub menu. Then,

select 1.Information and press .

2. Using

/ to select 1.Disc Info. or 2.Drive Info. or 3.System Info., and

press to see the related information.