User Manual

II. Function Introduction

3. The system will automatically detect the update file and execute

firmware update.

4. Once the firmware has been updated, the system will require you to

reboot the system.

**Note:

DO NOT save the firmware in a folder. The system can not detect

the firmware if you save it in a folder.

8. Setup

8-1. Auto Start Time

This setting will allow the system to do the Copy, Test, Compare and Copy

+ Compare functions automatically in a few seconds once the source and

blank discs are placed in the trays and detected by the system. The default

setting is 5 seconds. You can set a longer/shorter time from 1 to 99 seconds

or set OFF to disable this function and execute copy task manually.

1. Pressing / to select 8.Setup and sub menu 1.Auto Start Time.