Manual


4.8SystemUpdate

This function updates the system’s firmware version. Please save an un‐zipped update file to your
Flashdevice(DO NOTsavethe file inafolder). InserttheFlash device in slot(port#1) andselect[8
SystemUpdate],press[OK],thesystemwillautomaticallystarttoupdatefirmware.Whenitfinished,
turnthesystemofffor5secondsandthenturniton,thenewfirmwarewillbeupgraded.

5. Setup
5.1CopyArea
Therearetwooptionsforcopy:OnlyDataAreaandWholeMedia.

Only Data Area: This function automatically analyzes the source Flash device’s file format. If the
formatisFAT16,32/NTFS/Linux(Ext2, Ext3)whichisrecognizablebythesystem,itwillcopythedata
onlyinsteadofcopyingthewholeFlashdevicecontent.Iftheformatisnon‐recognizable,thesystem
willcopythewholeFlashdeviceincludingemptyspace.Forexamplea2GBFlashcardwhichisFAT32
file format andhas only 50MBof datainside; the system will onlycopy thatspecific50MBof data,
andwillonlytakeafewsecondstocopythesource(master)device.

**Thedefaultsettingofcopyareais“OnlyDataArea”.

WholeMedia:BysettinguptheduplicatortoWholeMediafunction,thesystemwillcopythewhole
Flashdevicescontent,includingthe empty space andformat. This function isused when youhavea
Flash source (master) which has an unknown file format and you don’t want the system to be
confusedby such a format.For examplea2GB flash cardwhich is FAT32file format andhasonly 50
MBofdatainside;ifyousetup“WholeMedia”thesystemwillcopythewhole2GBofcontentonyour
Flashdevice.Itwilltakemuchlongertocopythesource.

5.2 ButtonBeep
Youcanselecttohearabeepornotwhenyoupressthebuttons.

5.3 Language
Thisfunctionistosetupthelanguage.

9