Manual

ShowFlashdevice’sUSBvirusSteps:
1. InsertFlashdevicesintoduplicatorÆSelect[4.Utility]ÆPress[OK]ÆSelect[4.2ChkUSB
Virus]ÆPress[OK]ÆSystemwillsearchforUSBViruses
WhenredLEDison,itmeansthesystemfoundapotentialriskofaUSBAutorunvirus.

2. Press[Forward]/[Backward]tocheckotherFlashdevices’forvirusesÆPress[ESC]tofinish

4.3 CapacityCheck
ThisfunctionchecksFlashdevice’srealcapacityandcheckstoensurethattheFlashdeviceswork.

CheckFlashdevice’srealcapacitySteps:
1. InsertFlashdevicesintoduplicatorÆSelect[4.Utility]ÆPress[OK]ÆSelect[4.3Capacity
Check]ÆPress[OK]ÆSystemanalyzestheFlashdevice’srealcapacity

2. Press[Forward]/[Backward]tocheckotherFlashdevices’realcapacityÆPress[ESC]tofinish


**Capacitycheckfunctionsupportsasynchronousoperation;youcanpluginandpulloutFlashdevices
tochecktheirrealcapacitycontinuouslywithoutpressinganyotherbuttons.

4.4FormatFAT
This function formats Flash devices.The systemwill automaticallyformat the Flash deviceaccording
to itscapacity.If the Flashdevices capacity is above2GB,thesystem will format theFlash device to
FAT32,iftheFlashdevicescapacityisbelow2GB,theformatwillbeFAT16.Duringtheformatprocess,
youcancheckeachFlashdevice’sformattingstatusbypressing[Backward]/[Forward].

**Thesource(master)port(port#1)doesnotexecuteformatfunction.

FormattingFlashdeviceSteps:
1. InsertFlashdevicesintoduplicatorÆSelect[4.Utility]ÆPress[OK]ÆSelect[4.4Format
7