Instructions / Assembly

ManualsBrandsEZ-FLO ManualsBasic Kitchen FaucetsTuscany Collection 2-Handle Standard Kitchen Faucet with Matching Side Spray - Brushed Nickel

Dual Control

Kitchen Faucet

Before You Begin

Check to make sure you have the following:

10697

10699

Tools and Supplies

You will need the following to install your new faucet:

Groove

Joint Pliers

Pipe

Tape

Adjustable

Wrench

Matching Finish Side Spray

Silicone

Sealant

Summary of content (4 pages)

PAGE 1
0697 10699 Dual Control Kitchen Faucet Matching Finish Side Spray Before You Begin Check to make sure you have the following: Tools and Supplies You will need the following to install your new faucet: Adjustable Wrench Pipe Tape Groove Joint Pliers Silicone Sealant
PAGE 2
Faucet Installation Shut off main water supply before installation. 1 Shut off hot and cold water supply to faucet or turn off main water supply. 2 Position new faucet. Insert spray holder through fourth hole on sink. 4 Insert spray hose into spray holder. 5 Screw spray head onto spray hose. Protective Cap 3 Screw and tighten lock nuts onto faucet and shank. 6 Remove the protective cap prior to connecting the quick connect hose assembly.
PAGE 3
Faucet Installation Cold Hot 7 Securely attach water supply hoses or tubes onto inlet ports. 8 Apply pipe tape onto threads of the water supply. Tighten the hose onto water supply. 9 After installing faucet, remove aerator and turn on water to remove any left over debris. Reassemble aerator and tighten.
PAGE 4
Troubleshooting Guide Minor problems often can be fixed without a plumber. Before doing any work on the faucet, shut off water supply and close stopper or drain to avoid losing small parts. Problem Leak from spout Cause Damaged or dirty seals Leak from under handle Damaged cartridge Solution Disassemble faucet, remove cartridge. Clean or replace cartridge if necessary. Reassemble. .Remove handle. Replace cartridge. Uneven water spray Clogged aerator Remove aerator.