Instructions / Assembly

Shut off main water supply before installation.
1 Shut off hot and cold
water supply to faucet or
turn off main water
supply.
2 Position new faucet.
Insert spray holder
through fourth hole on
sink.
3 Screw and tighten
lock nuts onto faucet and
shank.
4 Insert spray hose into
spray holder.
5 Screw spray head onto
spray hose.
6 Remove the protective cap prior to connecting the quick connect
hose assembly. Attach lower end of spray hose to central supply tube
in facuet.
A. Push quick connect hose assembly firmly upward until unable to
push any further. You will hear a clear "CLICK" sound.
B. Pull down on quick connect hose assembly, if you can not pull off,
then quick connect hose assembly is secure.
C. To remove the quick connect hose assembly, push quick connect
hose assembly upward, then press the clip and housing together
while pulling down at the same time.
Faucet Installation
Protective Cap