Installation Guide

SPECIFICATION SHEET OF PRODUCTS
3.Features
 Complies with UL Standard 943(GFCI) and 498(reptacle)

Eight back-wire holes-two for each Line and Load terminal
 Constructed with impact-resistant thermoplastic cover and body
 Shallow 1-1/8 body provides extra wallbox room

Trip at 5mA threshhold,meets or exceeds UL requirements for trip time
 Trip in 0.025 seconds for 240 mA fault
 Electro-mechanical circuit interrupter is double-pole and trip-free(GFCI protection cannot be
overridden by holding reset button)
 Built-in transient suppression protects GFCI’s internal circuitry from voltage transients
 Slimmer design

Feed-through ready
 Silver-alloy contacts
 Temperature tolerance range: -35℃ to 66℃

Test instructions and 16-year monthly test record hang-tag provided to allow conformance with
UL-recommended monthly testing
 Dual-slot terminal and installation screws accept both Phillips and standard driver heads

100% fully-tested before shipping
 Supplied with wallplates
 Backed by a Limited Two-Year Warranty
4.Performance Specifications
Electrical
Dielectric Voltage withstand : Tested to 2000V(live components to ground).
Optimum Voltage Range : 102V to 132V AC 60HZ.
Current Rating : 20 Amps at receptacle, 20 Amps feed-though.
Mechanical
Terminal Identification : Terminals identified in accordance with UL 498(brass,silver-color & green).
Terminal accomodation : #14 gage through #12 gage copper and copper-clad conductors.
Product Indentification : Ratings are a permanent part of device housing.Each product contains a ETL label.
Enviromental
Flammability : Rated V2
Operating Temperature : -35℃ to 66℃