Instructions / Assembly

www.ezhandrail.com for videos 8
from the nose of your stair tread up the wall 34” – 38” and using the wall
bracket as a guide, make a pencil mark where the wall bracket fastener is
to be fastened into the wall. Hint: You can use an angle finder app on
your Smartphone or the rise/run chart at the end of these instructions to
double check that your handrail is angled parallel to your stairs.
12. Drill a 1/8” pilot hole for the wall bracket fastener. Important: Ensure
your pilot hole is hitting a solid mounting surface (stud).
13. Loosely attach wall bracket to your mounting surface (wall).
14. Loosely fasten handrail to the wall bracket using the 1” Phillips head
fasteners provided.
15. Uniformly position and install all intermediate wall brackets (incrementally
every 4’ to 6’ and loosely attach to handrail.
16. Once all the wall brackets, handrail, and handrail components are loosely
fastened in place, firmly secure (tighten down) the handrail system –
starting with tightening the wall brackets into the wall.
Note: Additional fasteners may be piloted and fastened into the wall brackets for
additional support.