Installation Guide

ManualsBrandsEZ Handrail ManualsKitchen3 ft. Charcoal Bronze Aluminum Round Hand Rail Kit

Kit Contents

Check the contents of the box with these instructions to verify all parts are

present. This will allow you to become familiar with the components of your

new handrail.

• Inspect all component parts for familiarity

• Layout recommended tools

QTY. PART

A. (1) Round Handrail

B. (2) Wall Brackets (3 with 8' kit)

C. (2) 5/16" x 2 1/2" Stainless Wood Fasteners (3 with 8' kit)

D. (5) 1" Metal Screws (8 with 8' kit)

E. (2) Bolt Head Caps (3 with 8' kit)

F. (2) Endcaps

G. (1) Drill Bit 5/32"

Required Tools for

Handrail Installation

(not included)

1- Screw or Impact Gun

2- Tape Measure

3- Drill Bits: 1/4" wood, 5/32"metal

4- Hex Bit Drivers 1/4" & 1/2"

5- Pencil

6- Masking Tape (or painters tape)

7- Safety Glasses

8- Rubber Mallet

Care and Maintenance

Gently wash with a clean, soft cloth and a mild detergent (e.g. Dawn Liquid

Dish Soap) followed by a clean water rinse and dry with a clean towel.

Even though powder coatings are highly resistant, certain solvents can harm

them. Avoid contact with all harsh chemicals and salts. If any of these should

contact the powder coated surface, immediately wipe the area with a soft,

clean cloth, and wash as described above.

THANK YOU FOR YOUR BUSINESS!

For questions or comments contact Madden Manufacturing:

800.248.1520

STRAIGHT ADA

HANDRAIL

INSTRUCTIONS

BUILDING STYLE &

SAFETY FOR YOUR LIFE

Congratulations!

You are on your way to a

maintenance free handrail

system that is easily

assembled and installed.

Please take a moment to read

the instructions before you begin

assembling your handrail.

Contents

Handrail Wall Installation Inside

Kit Contents Back Cover

Required Tools(not included) Back Cover

Care and Maintenance Back Cover

1 2

3 4

5 6

7 8

Summary of content (2 pages)

PAGE 1
Kit Contents Check the contents of the box with these instructions to verify all parts are present. This will allow you to become familiar with the components of your new handrail. • Inspect all component parts for familiarity • Layout recommended tools A B D F C G QTY. PART E A. (1) Round Handrail B. (2) Wall Brackets (3 with 8' kit) C. (2) 5/16" x 2 1/2" Stainless Wood Fasteners (3 with 8' kit) D. (5) 1" Metal Screws (8 with 8' kit) E. (2) Bolt Head Caps (3 with 8' kit) F. (2) Endcaps G.
PAGE 2
Handrail Step-by-Step Installation Note: Check local code requirements prior to installation This handrail’s versatility allows for many different types of installations. Therefore, these suggested steps may vary for your application. Please note, you may install your handrail onto many different wall types simply by obtaining the appropriate fasteners. If you have any questions on recommended fasteners, please visit our website. www.maddenmetals.com Handrail Interior Wall Installation 1.