Instructions / Assembly

www.ezhandrail.com for videos 14

EZ Round Handrail Stairwell Assembly and Installation

STEP 1:

1. Measure the stair rise and run then determine the angle using the

rise/run chart on the following page. We also recommend verifying your

angle using an angle finder app on your Android or iPhone – see

recommendations on the following page. Make sure to measure the angle

at the top, middle and bottom of stair run.

2. Attach wall brackets and components to handrail per previous

instructions. Important – Make sure wall brackets are attaching

into studs or solid mounting surface!!!

3. Holding handrail at proper height and against wall, fasten top wall bracket

into wall.

Smartphone Angle Finder

Instructions: (apps on next pg.)

Start by laying a straight edge

(lumber, handrail, etc.) across

multiple stair treads. After calibrating

and testing your angle finder app,

place your phone on the straight edge

and record angle.

Now take a similar reading by placing

the phone on the underside stair

stringer and verify your stair angle.

Note: Measuring the slope at the top,

middle, and bottom of the stair run is

highly recommended.