Installation Guide

ManualsBrandsEZ Handrail ManualsDeck Stairs1.9 in. x 6 ft. Textured Black Aluminum Handrail with Posts

Care and Maintenance

Interior and exterior - Finish maintenance is

minimal. Wash with a mild soap and fresh water

quarterly to ensure surface is clean and free of

dirt and contaminants. If using exterior in a cold

climate, protect the post base and fasteners

from corrosive de-icing salt if salting is used to

remove ice build-up on or around sidewalks. For

install or products support, call 573.365.7040, or

visit www.maddenmetals.com

THANK YOU FOR YOUR BUSINESS!

For questions or comments, contact

Madden Manufacturing: 573.365.7040

Congratulations!

You are on your way to a maintenance

free handrail system that is easily

assembled and installed. With your

system, you’ll feel safe being protected

by the tremendous strength of its

aluminum alloy components, plus be

comforted knowing the hardened

durable powder coated ﬁnish will

last year after year.

Please take a moment to read

the instructions before you begin

assembling your project.

ROUND HANDRAIL

WITH POSTS KIT

BUILDING STYLE & SAFETY FOR YOUR LIFE

Summary of content (4 pages)

PAGE 1
L I A R D N T A I K H S D T N S U O O P R ITH W DI BUIL NG LE STY &S TY AFE FOR LIFE R U YO Care and Maintenance Interior and exterior - Finish maintenance is minimal. Wash with a mild soap and fresh water quarterly to ensure surface is clean and free of dirt and contaminants. If using exterior in a cold climate, protect the post base and fasteners from corrosive de-icing salt if salting is used to remove ice build-up on or around sidewalks. For install or products support, call 573.365.
PAGE 2
Kit Contents Check the contents of the box with these instructions to verify all parts are present. This will allow you to become familiar with the components of your new handrail. • Inspect all component parts for familiarity • Recommended tools A I F L G H D M J E K C B Installation Overview Summary Note: Check local code requirements prior to installation Start by setting up your posts on the stair treads or level surface walkway in the desired locations (DO NOT FASTEN).
PAGE 3
Concrete Surface Installation (con't) Step 4 Once all holes have been drilled and all 4 wedge bolts are inserted halfway, finish tightening each wedge bolt ensuring each wedge bolt seats to the plate – DO NOT OVER TIGHTEN. Step 5 Repeat the above steps for post #2 ENSURING the posts are aligned properly to ensure the round pipe handrail will mount up in the cradles appropriately. Ensure each post is plumb and aligned.
PAGE 4
Congratulations! You are finished with your Round Hand Rail Post Kit installation. We hope you enjoy many years from this top quality product. If you have any questions or would like tips, contact us at 573.365.7040, or visit www.maddenmetals.com Appendix: Step by step for wood installation (will require 5/16" wood bit) 1 Step 1 Start with 1 post - A backer board such as a piece of 2x6 or 2x10 under the post placement location is required.