Installation Guide

Measure the Area
You will need to know exact measurement
of the Area where you want to install.
So you can have enough product to cover
the installation Area.
If you are installing on a existing natural
grass,mow shortest to the ground.
If you want, you can seed the Bare Ground
and spot area. You don’t need to seed on
grass area. Only seed where bare ground is.
Pet Turf Preparing Guide
Lay down where you want to install
Make sure all the wrinkles are gone.
Nail down one side first, this will make
installation lot easy (after one side
installed, be sure to pull and nail the
other side for tight installation).
For more information on installation, please
visit our website or give us a call.
Tel: [phone]
http://ezhybridturf.com/video.html
3ft
U- Pin Guide Position
4ft
4ft
6ft
NOTE: 2 weeks after installation, you will notice puffing of the pet turf. This is normal
when the grass pushes the pet turf. Be careful not to trip. It will settle down once the
grass comes through. Allow 4 ~5 weeks and natural grass will pull the pet turf
down and it will be firmly secure to the ground.