Brochure

ManualsBrandsEZ Lok ManualsFasteners & Hardware5/16-18 Flush Press Insert - Brass - - Pkg Qty 10

For Strong Threads in Metal, Wood and Plastic

Threaded InserTs

Summary of content (16 pages)

PAGE 1
Threaded Inserts For Strong Threads in Metal, Wood and Plastic
PAGE 2
Table of contents Solid Threaded Inserts For Metal.....................3 CARBON STEEL................................................................................ 3 THIN WALL INSTALLATION KITS.................................................... 4 SCREW LOCKING INSERTS.............................................................. 4 METRIC.............................................................................................. 5 AUTOTMOTIVE..............................................................
PAGE 3
STRONG THREADS MADE EASY All solid construction E-Z LOK threaded inserts install with standard tools. No special drills...no special taps...no special installation tools. E-Z LOK external threads are standard size and pitch to permit the use of standard drills and taps. E-Z LOKs can be installed with a screwdriver, bolt/jam nut (except IC series), or optional power drive tool. E-Z LOKs will not back out or vibrate loose.
PAGE 4
Carbon Steel Inserts For Metal EXTRA HEAVY WALL — COARSE THREAD SIZES EZ-LOK Part No. 335-4 335-5 335-6 335-8 335-10 Internal Thread 1/4-20 5/16-18 3/8-16 1/2-13 5/8-11 External Thread 1/2-13 9/16-12 5/8-11 7/8-9 1-8 Length in. .484 .515 .656 .687 .781 Tap Drill Size 27/64 31/64 17/32 49/64 7/8 Tap Size 1/2-13 9/16-12 5/8-11 7/8-9 1-8 Minimum Full Thread Depth 9/16 19/32 23/32 13/16 7/8 Drive Tool Catalog No. 500-3 500-4 500-5 — — Length in. .312 .375 .437 .500 .560 .
PAGE 5
Carbon Steel Inserts For Metal METRIC THREAD SIZES — METRIC INTERNAL/METRIC EXTERNAL EZ-LOK Part No. 450-3 450-4 450-5 450-6 450-8 450-10 450-12 450-16 450-20 450-24 Internal Thread M3-0.5 M4-0.7 M5-0.8 M6-1.0 M8-1.25 M10-1.5 M12-1.75 M16-2.0 M20-2.5 M24-3.0 External Thread M6-1.0 M8-1.25 M8-1.25 M10-1.5 M12-1.75 M16-2.0 M16-2.0 M24-3.0 M36-4.0 M36-4.0 Length 6.5mm 7.5mm 7.5mm 10.5mm 12.5mm 17.0mm 17.0mm 20.0mm 30.0mm 30.0mm Tap Drill Size 5.1mm 6.9mm 6.9mm 8.6mm 10.4mm 14.0mm 14.0mm 21.0mm 33.0mm 33.
PAGE 6
STAINLESS STEEL THREAD INSERTS FOR METAL COARSE THREAD SIZES IN 303 STAINLESS STEEL EZ-LOK Part No. 303-004 303-006 303-008 303-3 303-4 303-5 303-6 303-7 303-8 303-10 303-12 Internal Thread 4-40 6-32 8-32 10-24 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 5/8-11 3/4-10 External Thread 10-32 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8 Length in. .250 .280 .290 .406 .437 .484 .515 .656 .656 .687 .
PAGE 7
PREPACKAGED KITS — THREAD INSERTS FOR METAL CARBON STEEL THREAD INSERTS FOR METAL Kit Type Prepackaged kits containing a range of sizes are available. Note: Because E-Z LOK inserts install with standard tools, our kits contain only inserts. Drills and taps are not included.
PAGE 8
coil threaded Inserts For Metal UNC • Freerunning Internal 1D 1.5D 2D Free O/D Drill Thread Part No. Lgth (in) Part No. Lgth (in) Part No. Lgth (in) Min Max Part No. Size STI Tap (Intermediate) 2-56 3-48 4-40 20010 0.086 20110 0.099 20210 0.112 20015 0.129 20115 0.148 20215 0.168 20020 0.172 20120 0.198 20220 0.224 0.109 0.113 0.126 0.134 0.144 0.149 20060 3/32 20160 #36 A0260 #31 20070 20170 20270 5-40 6-32 8-32 10-24 20310 0.125 20410 0.138 20510 0.
PAGE 9
coil threaded Inserts For Metal METRIC COARSE • Freerunning Internal 1D 1.5D 2D Free O/D Drill Thread Part No. Lgth (mm) Part No. Lgth (mm) Part No. Lgth (mm) Min Max Part No. Size STI Tap (Intermediate) M2 x 0.4 M2.5 X 0.45 M3 X 0.5 40010 2 40110 2.5 40210 3 40015 3 40115 3.75 40215 4.5 40020 4 40120 5 40220 6 2.5 2.6 3.1 3.2 3.6 3.7 40060 2.10 40160 2.60 40260 3.10 40070 40170 40270 M3.5 X 0.6 M4 X 0.7 M5 X 0.8 40310 3.
PAGE 10
coil Insert thread repair kits STANDARD KIT Includes inserts, drill, tap, install tool and tang break E-Z LOK Kit Part No. SK20215 SK20315 SK20415 SK20515 SK20615 SK20715 SK20815 SK20915 SK21015 SK30215 SK30415 SK30515 SK30615 Thread Size 4-40 x 1.5D 5-40 x 1.5D 6-32 x 1.5D 8-32 x 1.5D 10-24 x 1.5D 12-24 x 1.5D 1/4-20 x 1.5D 5/16-18 x 1.5D 3/8-16 x 1.5D 4-48 x 1.5D 6-40 x 1.5D 8-36 x 1.5D 10-32 x 1.5D No. of Inserts 10 10 10 10 10 10 10 10 10 10 10 10 10 E-Z LOK Kit Part No.
PAGE 11
DRILLS, TAPS, INSTALL TOOLS & TANG BREAKS UNIFIED For Use With: Drills Drill Size Part No. STI Taps Part No. Install Tools Part No. Tang Break Part No. UNIFIED – COARSE 2-56 3/32 3-48 #36 4-40 #31 20060 20160 A0260 20070 20170 20270 M1002 M1003 M1004 T2002 T2002 T2004 For Use With: 5-40 6-32 8-32 #29 #25 11/64 20360 A0460 A0560 20370 20470 20570 M1004 M1005 M1006 T2004 T2005 T2006 METRIC – COARSE M2-0.4 2.1mm M2.5-.45 2.6mm M3-0.5 3.
PAGE 12
ULTRASONIC INSERTS — TAPERED ULTRASONIC INSERTS—TAPERED Designed for use in thermoplastics • Tapered design reduces installation time • Install ultrasonically or with heat driver • Superior torque/pull out resistance • UNC and Metric threads • Single and double vane TAPERED SINGLE VANE Part Number.
PAGE 13
ULTRASONIC INSERTS — STRAIGHT ULTRASONIC INSERTS—Straight Designed for use in thermoplastics • Straight design permits thinner boss walls • Install ultrasonically or with heat driver • Superior torque/pull out resistance • FLUSH and flANGED designs STRAIGHT FLUSH Part Number. HI-002-WH HI-004-WH HI-006-WH HI-008-WH HI-124-WH HI-132-WH HI-420-WH HI-428-WH HI-518-WH HI-524-WH HI-316-WH HI-324-WH Internal Thread 2-56 4-40 6-32 8-32 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 Overall Length (L) .
PAGE 14
PRESS INSERTS FOR THERMOSET PLASTICS FOR CORED OR DRILLED HOLES IN PLASTIC Diamond-knurled press inserts are designed to replace molded-in inserts and threads in thermoset plastics. • Install cold • Sharply reduce the cost of moldings • Cut reject waste caused by misaligned and faulty inserts • Eliminate the need to “chase” threads after molding • Install properly without a precise hole depth A L B BRASS — FLUSH EZ-LOK Part No. Internal Thread A ±.010” B ±.010” L ±.
PAGE 15
THREAD INSERTS FOR WOOD BRASS KNIFE THREAD INSERTS — FOR WOOD External knife threads provide superior holding power in hard and soft woods, particle board and all wood products. Use wherever field assembly or disassembly could lead to thread erosion or stripping. The long pilot ensures straight driving into a drilled hole. Install with screwdriver, bolt and nut, tapping head, or E-Z LOK driving tool. EZ-LOK Part No.
PAGE 16
B A BRASS FINSERTS FOR PLASTIC & WOOD A .375 .563 Finserts provide strong metal threads in wood, composition board and thermoplastics such as nylon, polystyrene, cellulose acetate and cycolac. By distributing stress over a greater surface area, firm permanent fastening C is ensured. The fins give higher holding strength in softer materials. Available with one, two or three fins for varying material thickness, Finserts Bprevent splintering, splitting and thread pullout. C B A A A .188 .375 .