Instructions / Assembly

Madden ScreenRail

Instructions

Overview:

This instruction set shows the fabrication of

the integrated railing portion of your screen

enclosure. Additional steps are neccesary

for a complete screen enclosure.

Parts:

A. (2) 2x2" Open back (top and bottom rails)

B. (2) Railing snap (top and bottom rails)

C. (2.5) 1" Square Balusters per ft.

D. (2) Capri Clips

E. (4) 1.5" Fasteners per baluster

F (8) ¾" Self Drilling Fasteners

Kits come in 8'lengths

PAGE 1
Madden ScreenRail Instructions Overview: This instruction set shows the fabrication of the integrated railing portion of your screen enclosure. Additional steps are neccesary for a complete screen enclosure. Parts: A. B. C. D. E. F (2) 2x2" Open back (top and bottom rails) (2) Railing snap (top and bottom rails) (2.5) 1" Square Balusters per ft. (2) Capri Clips (4) 1.
PAGE 2
Step by step Instructions 1 Step 1 Measure and cut the (A) 2x2" Open Back bottom AND (A) 2x2" Midrail to fit firmly between your vertical posts or walls. Using wood or concrete screws, fasten ONLY the 2x2" bottom rail along the floor with the open side up. IMPORTANT – Make sure the spline groove is facing the desired direction. We recommend facing teh screen in for elevated enclosures.