Instructions / Assembly

Q. DOES THE IGNITER SPARK?
B. YES:
1. Iftheignitersparksbuttheunitfailsto
flameup,firstcheckthatyouareusingalkalinebatteries.If
thebatteriesareweaktheywillnotopen/holdopenthegassolenoid–thisresultsingasbeing
restricted from entering the burners.
2. If the heater contains brand new alkaline batteries and sparks, yet does not ignite, a faulty gas solenoid
valve may be present.
To test the gas solenoid contact EZ Tankless Support.
3. Iftheignitersparks,theunitflamesupbutextinguishesitselfin5-10seconds,afaultylimitswitch
may be present. In order to resolve, bypass the limit switch by completing the circuit between its two
wire connections. With that circuit completed before again attempting to run the water heater.
4. If the unit fires and remains lit with the limit switch bypassed, order a new limit switch from our parts
page on our website: [http://www.eztankless.com]
For complete and up to date troubleshooting and self help videos please visit:
http://www.eztankless.com/support/ez-101-troubleshooting/
EZ TANKLESS 101 OPERATION + INSTALLATION MANUAL PAGE 12..
Contact EZ Tankless Support - Mon-Fri 9am-5pm EST - [phone]