Installation Instructions

11
The illustration is based on model with display and only for reference.
 Gas Inlet installation
⑴ Attach gas regulator with hose to the gas cylinder. Use hand pressure only on the
plastic connector, then, Attach gas regulator with hose to the portable gas water
heater.
⑵ After connecting the pipes, please check the connections with soapsuds for gas
leakage.
⑶ Gas tube should be oil-proof, anti-corrosion, and not more than 2 meters long as
per gas authority specifications.
 Water Inlet installation
There is an accessory of 3/4"NPT fitting for garden hose. It is suggested to use the
fitting to connect the water inlet point and your garden hose as above Fig.11
shows.
Fig.11